Digital Projection lightning series, Руководство пользователя

Страница: 87 / 156

D E L E T E M O D I F Y N E W C O P Y V I E W S E L E C T
K
- - -
O D E
5 0 0
C A N C E L
O K
S A V E A S
C o m p u t e r V i d e o 7
M o d e N a m e
S c a n S y n c P o l a r i t y
H o r 3 1 . 5 0 k H z P o s N e g N / A
V e r 6 0 . 0 0 H z P o s N e g N / A
R e s P h a s e
A c t i v e P i x e l s 8 0 0 1 0 0
A s p e c t R a t i o 4 x 3
8 0 0 x 6 0 0
M o d e P a r a m e t e r s
- - -
e r
The duplication of a computer name allows you to save a different set of mode
parameters for the same computer. If a card using the factory defaults is selected, a
duplicate will be made using the same name but with an asterix (
*
) at the end.
The next step is to set the new computer's Resolution Mode, this is done by
selecting 'CREATE/MODIFY'. The 'MODE PARAMETERS' window will open
(see below) and you should enter the following information.
Mode Name - Name the set of mode parameters.
Scan Rates - Enter the scan rates stated in your computer card specifications.
Sync Polarity - Defines the polar values for the horizontal and vertical syncs as
stated in your computer card specifications.
Size and Position - Set values (shown as percentages) for the horizontal and
vertical size and position.
Active pixels - In these fields define the number of active pixels across the display
and the phase of each pixel from the start of one pixel period to the end.
Aspect Ratio - From this fly-out list select an aspect ratio.
C—37
System Operation
OPERATION
LBV00056; Revision C - 01/03/03