Digital Projection lightning series, Руководство пользователя

Страница: 41 / 156

B—9
System Installation
INSTALLATION
LBV00056; Revision C - 01/03/03
MOUNTING FEET
There are four mounting points located on the underside of the projector for the
attachment of the mounting feet. Each foot is screwed into the mounting points and
tightened using a spanner on the flats of the foot shaft. The projector can be levelled
using the black adjustment rings on each foot which allow 25mm (1 inch) of move-
ment. The rubber foot base incorporates a ball socket connector which will form to
an uneven surface to assist in mounting.
Although the adjustment rings on the projector feet will allow the slight raising or
lowering of the front of the projector, it is recommended that projector is made
level and the lens shift feature is used to perform this function.
Care should be taken when removing or attaching the projector feet to ensure that
the projector does not rest on its feet at an angle.
✍
Adjustment
Ring
Rubber
Foot Base
Foot Shaft
Connecting Screw
Ball Socket
Connector
1125mm (44.30")
744mm
(29.30")
465mm
(18.30")
790mm (31.10")