Digital Monitoring Products XR20, Руководство пользователя

Страница: 50 / 52

Numeric Pager Display
0 0 1 2 8 - 3 0 1 2 3 4 0 0 1 0
Account
Number Message
ID
Always
Zero
Area
Number
Always
Zero
User
Number
Account Number
This number is programmed into your Security Command™
system as an identifier. Whenever the system sends a
message to your pager, it always sends the account number
first to identify itself.
Message ID
This is always a single digit that describes the message.
1
= Zone Alarm
5
= Late to Close
2 = Zone Trouble 6 = User Check-in
3
= Area(s) Arming
7
= Local Message
4
= Area(s) Disarming
Zone or Area Number
If this message is for a zone, the 1 to 2-digit zone number
displays.
If this message is for areas being armed or disarmed, the
area numbers display in sequential order. Example: 1 2 4.
User Number
This is a 3-digit number that identifies the user.
1. Call the panel phone number. The panel answers and sounds one
short tone.
2. Enter your code within eight seconds. One beep means the code
is good. Four short beeps means enter it again. You have three
tries.
3. You have 30 seconds to enter the first command (see other side) and
30 seconds for each additional command.
If You will hear
All areas are armed 3 short beeps
Area 1 (Perimeter) is armed 1 short beep
Any area is armed 2 short beeps
All areas are disarmed 1 long beep
1. Call the panel phone number. The panel answers and sounds one
short tone.
2. Enter your code within eight seconds. One beep means the code
is good. Four short beeps means enter it again. You have three
tries.
3. You have 30 seconds to enter the first command (see other side) and
30 seconds for each additional command.
If You will hear
All areas are armed 3 short beeps
Area 1 (Perimeter) is armed 1 short beep
Any area is armed 2 short beeps
All areas are disarmed 1 long beep
Cut along dotted lines.