Digital Monitoring Products XR20, Руководство пользователя

Страница: 31 / 52

User Menu XR20 User’s Guide 27
Changing User codes
User Code Level:
Master only.
1. Access the User Menu.
2. Press the COMMAND key until
USER CODES? displays.
3. Press any Select key. The keypad displays
ADD DEL CHG
.
4. Select
CHG
to change a user code.
5. At the USER NUMBER: — prompt, enter the user number to
change and press COMMAND.
6. The display changes to CODE NO: * * * * . Enter the new
user code.
If the code you entered is already in use, or is a code used
internally by the system, the keypad displays ALREADY IN
USE . You must enter a different 4-digit user code.
7. If you are changing a code other than your own, the keypad
next displays MASTER? NO YES .
Select YES if you want this user to have a Master authority
level.
Select
NO
if you want this user to have a Standard authority
level. If you select NO , refer to item number 7 in the Adding
User Codes section on the previous page.
Note: Changing a user code does not change the user number. User
number 2 may have their user code changed from 1234 to 5678 but
they are still user number 2.
Deleting User codes
User Code Level:
Master only.
1. Access the User Menu.
2. Press the COMMAND key until
USER CODES? displays.
3. Press any Select key. The keypad displays
ADD DEL CHG
.
4. Select
DEL
to delete a user code from the system.
5. At the USER NUMBER: — prompt, enter the user number you
want to delete and press COMMAND. The display changes to
USER # DELETED
.
6. The display then changes back to USER NUMBER: — for you
to delete another user. Press the Back Arrow key twice to
exit the User Menu.
Ambush Code
Your system may be programmed to allow user number 1 to
be an Ambush code. The Ambush code functions identically to
other codes with the exception that it sends a silent alarm to the
central station. This silent alarm alerts the operator to a duress
situation at the premises and prompts immediate notification of
the authorities.
Refer to the System Setup section of this guide to see if your
system is programmed for Ambush. If your system is programmed
for Ambush and you expect to use the Ambush function, the code
you enter for user number 1 is the Ambush code.