Digital Monitoring Products XR20 Скачать руководство пользователя страница 33

Страница: 33 / 52

User Menu

XR20 User’s Guide

Extending Schedules

User Code Level

: Master or Standard.

Function:

This option allows users to extend today's programmed

closing time schedule.

Extending a Closing Schedule

1. Access the User Menu.
2. Press the COMMAND key until

SCHEDULES?

displays. Press

any Select key.

3. The keypad displays

PRM EXT

. Select

EXT

The keypad displays

– : AM PM

. Enter in the new time

for the closing schedule to expire.

Extending the Schedule at CLOSING TIME! Display

1. Press any Select key. The keypad displays

ENTER CODE:-

2. Enter your code and press COMMAND. The system schedule

is automatically extended one hour.

3. The keypad then displays

-: AM PM

. You can enter a time

to extend the schedule for any time other than the default

one-hour extension. Press

Note:

If the system is not armed by the scheduled closing time, a

Late to Close report is sent to the central station. If the schedule

is extended, a Schedule Change report is sent.

Date and Time

User Code Level:

Master only.

Function:

Allows you to change the current date and time displayed

on the keypad and used by the system for Display Events.

Setting the Date and Time

1. Access the User Menu.
2. Press COMMAND until

TIME?

displays. Press any Select key.

3. The keypad displays the current day and time. Press

the COMMAND key to display the current date. Press the

COMMAND key again to make any changes.

4. The keypad displays

TIME DAY DATE

. Select

TIME

change the time. The keypad displays –

: AM PM.

Enter

the current time and select

5. The display changes back to

TIME DAY DATE

6. Select

DAY

to change the day of the week. The keypad

displays

SUN MON TUE WED

. If the current day does not

display, press the COMMAND key. Select the correct day.

7. Select

DATE

to change the date. The keypad displays:

MONTH: -

Enter up to two digits for the month.

Press COMMAND.

DAY: -

Enter up to two digits for the day.

Press COMMAND.

YEAR: -

Enter up to two digits for the year.

Press COMMAND.

The display returns to

TIME DAY DATE

. Press the Back Arrow

key to exit the User Menu.

Содержание XR20





















































Результаты поиска

Содержание XR20

Отзывы:

Бренды по названию

Популярные бренды

Digital Monitoring Products XR20, Руководство пользователя

Результаты поиска

Содержание XR20

Отзывы:

Бренды по названию

Популярные бренды