MultiDrive Adapter Manual 4
Connecting a 2.5 inch hard drive:
To use with a 2.5 inch hard drive, slide the drive into the top 44 pin connector un-
til fi rmly seated, making sure not to damage or bend any of the pins. The adapter
can then be connected to a write blocker or other standard IDE 40 pin connector.
Connecting a 1.8 inch hard drive with pin connector:
To use with a 1.8 inch hard drive with a pin connector, slide the drive into the
bottom 50 pin connector until fi rmly seated making sure not to damage or bend
any of the pins. The adapter can then be connected to a write blocker or other
standard IDE 40 pin connector.
Connecting a 1.8 inch hard drive with ZIF connector:
In order to use the MultiDrive adapter with a 1.8 inch hard drive with a ZIF con-
nector, the drive must be installed using the ZIF drive housing. The MultiDrive
adapter comes with two sets of brackets, one for Toshiba drives (labeled “T”) and
one for Hitachi drives (labeled “H”).
