Connecting the MultiDrive adapter to a host:
The MultiDrive adapter connects to a write blocker or standard 40 pin IDE con-
nector. Be sure to also connect the 4 pin molex power connector to provide
power to the drive.
Troubleshooting:
Please try the following troubleshooting steps if experiencing diffi culties
Check your connector to make sure you have a good connection and have
1.
not damaged any pins when attaching the drive.
Check to make sure you have provided power to the adapter through the 4
2.
pin molex connector.
If you need additional assistance please contact Digital Intelligence Tech Support
at
http://www.digitalintelligence.com/support.php
. Our technical staff will be
happy to assist you.
MultiDrive Adapter Manual 5
