Digital Equipment VXT 2000 Model VX225, Информация по установке

Страница: 23 / 42

Solving Problems
If the Terminal Window Is Not Displayed
When you turn on the terminal, it performs its self-tests. Then the terminal
displays the Terminal Manager window, unless your system manager has set
up the terminal differently. If the Terminal Manager window is not displayed,
you may have a problem with the terminal, the network, or your server.
To see if the problem is in the terminal:
1. Turn the terminal’s power switch off.
2. Disconnect your network cable from the terminal.
3. Turn the terminal’s power switch on.
The terminal performs its self-tests. You should see the following display
with the network cable disconnected:
Display Meaning
VXT V0n.nnn
VXT boot ROM version number
08-00-2B-11-22-33
Terminal’s Ethernet address
nnMB
Megabytes of memory installed
LJ-01540-TI0
Self-test progress indicator
?? 001 9 VNI 0168
Error for disconnected network cable
(any other error code...)
>>>
Make sure the memory size listed equals the amount of memory installed
in the terminal. If not, remove and reinstall optional memory modules
(Appendix B). If there is still a problem, contact your system manager.
If you see another error code here, the problem is in the terminal. Here are
some errors you can correct:
Error Code Solution
?MOP 255
Add terminal memory to load the VXT system image.
?? 003 3 QDZ 0096
Check that the mouse is plugged in correctly.
?? 002 3 QDZ 0080
Check that the keyboard is plugged in correctly.
?? 020 12 IMG 0016
Check that the image accelerator module is seated
correctly.
If you do not see another error code, the problem is related to your network,
host system, or server. In any case, provide the results to your system
manager.
VXT 2000 Models VX225 and VX227 17