Digital Equipment VRE01, Установка и использование

Страница: 16 / 26

3
Operation
Power up the monitor
Depress the power switch to the on position and wait for the green power
light to display. Wait a couple of seconds for a video display. The monitor
runs the internal power-up self-test, and a system display appears on the
screen.
• If the monitor
is connected to the host system, a system-specific
message (or prompt) appears on the screen.
• If the monitor
is not connected
to the host system, a self-test
pattern (white, full-on display, all pixels illuminated) appears on the
screen.
NOTE
If neither the green power light, the message display, nor the test
pattern appear on the screen, refer to Table 4–1.
3–1