Digital Equipment RouteAbout Access EW, Руководство по установке

Страница: 75 / 80

Installation Information – United Kingdom C-3
Host Power Rating
Digital has designed all permutations of the host configuration to operate
within the limits of the host power rating as shown in Table C-2.
Table C-2 Module Power
Input Voltage Max. Input Current (Amperes)
+5.25Vdc 1.0 amps
Module Isolation
No special clearances or creepage distances need to be maintained as the
RouteAbout Access EW is contained within its own cabinet, which meets
all clearances for PTT approval.
Safety Status
All interconnection points on this product are SELV circuits and should
only be connected to products with like SELV circuits.
Cable Approval
The module is approved for direct connection to a particular digital
circuit. This approval includes an interconnecting cable with mating
connectors that conform to the British standard BS6623, parts 1 and 4. If
the module is connected to the service with anything other than its own
approved cables, those cables must benefit from relevant general
approval NS/G/1235/100009 or conform to any other applicable
requirements, or both.
Supported Cables
Digital supports all of the cables in Table C-3. The approved module may
not use all of these cables; therefore, check the instructions to determine
which interface types are supported.