Digital Equipment RouteAbout Access EW, Руководство по установке

Страница: 44 / 80

3-6 RouteAbout Access EW Set-Up
Accessing the Set-Up Port
To access the set-up port on the RouteAbout Access EW module, press
the Return key on the set-up port device a few times until the DEChub
900 MultiSwitch INSTALLATION MENU appears (shown below). This
example shows the dialog associated with this option.
DEChub 900 MultiSwitch
=============================================================
DEChub 900 MultiSwitch INSTALLATION MENU
[1] Reset with Factory Defaults
[2] Reset with Current Settings
[3] Show Current Settings
[4] Configure IP...
[5] Dump Error Log
[6] Downline Upgrade
[7] Configure Out-of-Band Port...
[8] Start Event Display Mode
[9] Start Redirect Mode...
=============================================================
Enter selection number: 9 <Return>
Enter
9
to select
Start Redirect Mode...
and then press the
Return key.
The
Start Redirect Mode
option redirects the DEChub 900
MultiSwitch Hub Manager set-up port to the set-up port of any network
module (such as the RouteAbout Access EW) that is installed into the
DEChub 900 MultiSwitch. Choosing this option allows you to set-up or
obtain the status of an installed network module by accessing the
specified network module's installation menu.