Installation Guide
7
Connect the power cord
Connect the ac power cord to the server, then to your
power outlet.
CAUTION
If your server has a voltage select switch, the
switch must match the voltage supplied by your
outlet. In North American countries, 115 V ac
current is common. In other countries, 230 V ac
current is common. Make sure that the voltage
select switch is set to the correct voltage. If it is
not set correctly, you can damage your server.
The voltage select switch is located above the
monitor power outlet.
Do not attempt to modify or use an external
100 V ac (Japan only) or 115 V ac power cord
for 220-240 V ac input power. Modifying either
power cord can cause severe equipment
damage.
5
