Prioris Servers
4
Install any internal options
If you have options to install, install them now.
1. Unlock side panel
2. Remove side panel
3. Install options
Refer to these chapters in the User’s Guide for detailed
information on:
■
Expanding Your Server
■
Server Utilities
Also, refer to the documentation that came with the op-
tion kit for specific installation instructions.
NOTES
ISA cards should be installed after you run the System
Configuration Utility (SCU) in Step 7 or 8.
Before touching any circuit board or component, wear
an anti-static wrist strap, properly grounded to the server
chassis, or touch the metal frame to discharge any static
electricity.
If your server was not pre-configured at the factory, you
need the following minimum requirements to proceed
with the server installation:
■
16 MB of RAM
■
SVGA monitor
■
540 MB minimum hard disk drive
■
Two or three button mouse
■
CD-ROM drive attached to the bootable SCSI con-
troller
■
Keyboard
2
