Utilities & Configuration
Utilities & Configuration
Digital PRIORIS HX MP Server
Digital PRIORIS HX MP Server
24
24
MCS Logistics Engineering - Nijmegen
MCS Logistics Engineering - Nijmegen
P
R
I
O
R
I
S
H
X
M
P
Memory and Cache Options
(continued)
Menu Fields
Settings
Comments
Shadow 16K
at:
C8000h
CC000h
D0000h
D4000h
D8000h
DC000h
E0000h
E4000h
Enabled
Disabled
Allows to enable or disable shadowing and caching of individual
segments of ROM to increase server performance.
Caution: Some option ROMs do not operate properly when
shadowed.
AT Bus Space
Disabled
F00000h,
1 MB
E00000h,
2 MB
C00000h,
4 MB
Memory hole not available upper memory is contiguous.
Sets the memory hole at address F00000 with 1 MB memory
available.
Sets the memory hole at address E00000 with 2 MB memory
available.
Sets the memory hole at address C00000 with 4 MB memory
available.
Boot Options
Menu Fields
Settings
Comments
Boot option
A: only
A: then C:
C: then A:
C: only
Each time the server boots, it will load the operating system from the
drive sequence selected.
Summary
screen
Enabled
Disabled
Enabling this option causes the server to display configuration
parameters (in the form of a summary screen) during boot.
SETUP
prompt
Enabled
Disabled
Enables or disables the <F2> setup prompt each time the server boots.
Note: Setup can still be entered by pressing <F2> before POST
completes.
POST errors
Enabled
Disabled
Enabling this options causes the server to pause and display a setup
entry or resume the boot prompt if an error occurs at boot.
Disabling this option causes the server to always attempt to boot
regardless of a setup entry or error.
Floppy check
Enabled
Disabled
Enabling this option causes the server to verify the diskette type each
time the server boots.
Disabling this option speeds up the boot process.
