Digital Equipment DIGITAL Server 7100 1200 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 162

Digital Equipment DIGITAL Server 7100 1200 Скачать руководство пользователя страница 2

January 1998

The information in this document is subject to change without notice and should not
be construed as a commitment by Digital Equipment Corporation.

Digital Equipment Corporation assumes no responsibility for any errors that might
appear in this document.

The software, if any, described in this document is furnished under a license and may
be used or copied only in accordance with the terms of such license. No responsibility
is assumed for the use or reliability of software or equipment that is not supplied by
Digital Equipment Corporation or its affiliated companies.

Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject
to restrictions as set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data
and Computer Software clause at DFARS 252.227-7013.

DIGITAL Server 7100 Series Service Maintenance Manual



1998 Digital Equipment Corporation.

All Rights Reserved.

AMI is a registered trademark of American Megatrends, Inc.
DEC, DIGITAL, ServerWORKS, and the DIGITAL logo are trademarks of Digital
Equipment Corporation.
Intel and Pentium are registered trademarks of Intel Corporation.
Microsoft, Windows NT, and Windows 95 are registered trademarks of Microsoft
Corporation.
Novell and NetWare are U.S. registered trademarks of Novell Inc.
OS/2 and PS/2 are registered trademarks of International Business Machines
Corporation.
SCO is a trademark of The Santa Cruz Operation, Inc.
SCSI

Select is a registered trademark of Adaptec Corporation.

UNIX is a registered trademark of X/Open Company, Ltd.

All other trademarks and registered trademarks are the property of their respective
holders.

«
1
2
3
4
...
»

Содержание DIGITAL Server 7100 1200



































































































































































Отзывы:

Нет отзывов