Digital Equipment DIGITAL Server 7100 1200, Руководство по техническому обслуживанию

Страница: 111 / 162

FRU Replacement
5-34
Installing Additional Memory
The DIGITAL server supports up to 4 GB of EDO/ECC server memory using
168-pin Dual In-Line Memory Modules (DIMMs). Memory can be increased by
adding or replacing DIMMs.
This chapter provides the memory configuration guidelines that must be followed
prior to installing additional DIMMs on memory modules 1 and 2. Procedures for
removing a memory module and troubleshooting are also included.
The DIGITAL Server provides a 4-way interleaved memory system, with 128 MB
(4 x 32 MB) minimum supported memory and 4 GB (16 x 256 MB) of maximum
supported memory. Prior to installing any DIMM combination, make sure you read
the memory configuration guidelines that follow.
Only install DIMMs supported by Digital Equipment Corporation. DIGITAL does not
support server performance or product warranty resulting from installing non-qualified
DIMMs.