Digital Equipment DIGITAL Server 7100 1200, Руководство по техническому обслуживанию

Страница: 145 / 162

Processor Module Upgrades
6-9
DI
GI
TA
L
S
erve
r
31
00
/3
20
0
DI
GI
TA
L
Se
rv
er7
10
0
Installing a Processor on a Processor Module
The following sections provide detailed instructions on how to install a processor on a
processor module.
Removing the Processor Module
1. Power down the server.
2. If applicable, remove the video expansion board.
3. Place the antistatic wrist strap on your wrist and connect the grounding clip
to a non-painted metal surface of the server’s chassis.
4. Using a Phillips screwdriver, unscrew and remove the processor module
retaining bracket (Figure 6-3).
5. Grasping both ends of the processor module, carefully remove it from the
main logic board and place it on an antistatic surface.