Digital Equipment DECagent 90, Информация пользователя

Страница: 82 / 92

• Dh90SlotIfBase—Read-only
An index into the ifTable for the first interface on this module. Add one to
this value to reference the ifTable entry which corresponds to the second
interface, and so on. If no interface is supported on the module, a value of
zero is returned.
• Dh90SlotIfNumber—Read-only
Number of interfaces on this module.
• Dh90SlotPhysicalAddress—Read/write
A read/write variable for the physical address to allow devices to be added to
the hub remotely. Writing this variable as part of a remote add device routine
will cause the new physical address to be accessible in the ifTable.
• Dh90SlotPortNumber—Read-only
The number of ports on this module.
• Dh90SlotPassword—Write-only
Password used to enable management mode on the server.
• Dh90SlotNewPassword—Write-only
Setting this variable causes the agent to set a new password on the terminal
server using the TSNewPassword value as the new password and TSPassword
as the old password. Power on the terminal server must be cycled within a
minute for the change to take effect.
• Dh90SlotPolling—Read/write
The current polling status of the module. If the DECagent 90 is polling
this device, a get of this variable will return ’on’, otherwise ’off ’ is returned.
Setting this variable to ’off ’ causes the agent to stop polling the device in this
slot.
• Dh90SlotPrimarySpecific—Read-only
A reference to the Bridge { experimental 14 } or the Character-like
{ experimental 19 } MIB definition. If the module realizes some other
function, the object identifier nullSpecific OBJECT IDENTIFIER ::= { 0 0 } is
returned.
C–8 MIB Groups and Communities