Digital Equipment DEC WANcontroller 618, Решение проблем, Страница: 3 / 8

NIC LED States
Slow flash
Fast flicker
READY
HOTSWAP
FAULT
ATTENTION
The LED display shows the state of the NIC when the module self-test
or system self-test was last run: see the Installation and Service Manual
for your DECNIS for more details.
Module self-test in progress.
The NIC is either waiting to load or is load-
ing software.
The NIC has passed its module self-test
and has successfully loaded the software.
The NIC is disabled.
(The NIC switch is set down.)
The NIC has failed its module self-test.
The NIC is partly working.
You can continue to use working port(s),
but you must isolate and replace the faulty
component as soon as possible.
A flickering RUN LED indicates
that the NIC software is waiting
to load.
flash
flicker
flash
LKG–5722–91I
3