Digital Equipment DEC 10000, Руководство по обслуживанию

Страница: 42 / 70

2-16 Servicing the CPU
2.7 FEPROM Recovery—Software Requirements
and Setup
On the source system you need to "bind" the RRD42 or InfoServer
to a virtual disk container, mount it, and set the terminal speed to
that of the target console.
Example 2-5 Setting Up the Source System
$ set term/speed=9600/perm txa3: # Set DMB32 port to
# 9600 baud.
$ mcr ess$ladcp # Run LADCP.
LADCP> BIND VAX7000_V01 # This is the volume label
VAX7000_V01 is bound to DAD104 # from the CD.
LADCP> exit
$ mount/ov=id dad104 # Mount the CD-ROM.
$ dir dad104:[sys0.sysexe] # Get a directory of the
. # CD.
. # Desired file name will
VAX7000_10000_CONSOLE_IMAGE.GROM # be AXP7000_10000_...
# or VAX7000_10000_...
.
$ Kermit # Enter Kermit from DCL.
Kermit-32> set file type binary
Kermit-32> set retry packet 5 # Set max retries/packet.
Kermit-32> set send time 5 # Set send timeout.
Kermit-32> show all # Shows all Kermit params.
Kermit-32> set xxx # Set other parameters.