Digital Equipment DEC 10000, Руководство по обслуживанию

Страница: 53 / 70

Updating Firmware 3-7
1
If you type just the command
show
without a device mnemonic, LFU
prompts for the device mnemonic. All the commands that require de-
vice mnemonics will prompt.
2
If you enter
?
(or
help
) for the device, a table displays the syntax for
specifying devices. All the commands that require device specifica-
tions use this syntax. Note the use of wildcards. For example,
show kdm70*
would display all KDM70 controller modules.
3
If you enter an
exit
command at the device prompt, LFU returns to
the function prompt for another command.
4
The most useful form of the command is
show *
which displays
every module in the system. Note in this example that the CPU and
CIXCD modules require updating. (In other words, the + means that
the firmware version on the CD-ROM is higher than the version on
the module.)
5
VAX 10000 systems do not support kn7aa and kzmsa. The following
devices show up in the display instead:
ka7aa0 + 1.1 E04
kfmsa0 5.6 A04