Digital Equipment CELEBRIS 5100, Руководство по техническому обслуживанию, Страница: 35 / 94

Digital CELEBRIS Pentium PC Service Procedures
MCS Logistics Engineering - Nijmegen 35
CELEBRIS Pentium Full-Profile Expansion Slots
The CELEBRIS Pentium Full-Profile computer models contains six slots for installing up to five ISA or
PCI expansion boards (refer to the following Table). These four slots are located on the computer’s riser
card.
Expansion
Slot Slot Type Description
J4 through J6 ISA Supports full-length industry-standard 16-bit ISA expansion
boards.
Uses the top three expansion slot at the rear panel.
J3
ISA Supports full-length industry-standard 16-bit ISA expansion
boards.
Uses the fourth expansion slot at the rear panel.
Designated as a shared slot with PCI slot J2.
J2
PCI Supports full-length 32-bit PCI local bus expansion boards.
Uses the fourth expansion slot at the rear panel.
Designated as a shared slot with ISA slot J3.
J1 PCI Supports half-length 32-bit PCI local bus expansion boards.
Uses the bottom expansion slot at the rear panel.
NOTE Only one expansion board can reside in slot J3 and J2 at any one time. These slots
have to share the middle expansion slot opening at the rear panel.