Digital Equipment CELEBRIS 5100, Руководство по техническому обслуживанию, Страница: 33 / 94

Digital CELEBRIS Pentium PC Service Procedures
MCS Logistics Engineering - Nijmegen 33
Expansion Slots
The computer automatically assigns the necessary resources to any installed Plug and Play-compatible
expansion board so it operates at maximum performance. If you plan on installing non-Plug and Play
expansion boards, it may be necessary to manually set jumpers on the board based on the computer
resources already allocated.
CELEBRIS Pentium Low-Profile Expansion Slots
The CELEBRIS Pentium Low-Profile computer models contain four slots for installing up to three ISA or
PCI expansion boards. These four slots are located on the computer’s riser card.
NOTE Prior to installing non-Plug and Play expansion boards, run the ISA Configuration
Utility (ICU) to configure the computer to avoid resource conflicts.
Expansion
Slot Slot Type Description
J4 ISA Supports full-length industry-standard 16-bit ISA expansion
boards.
Uses the top expansion slot at the rear panel.
J3
ISA Supports full-length industry-standard 16-bit ISA expansion
boards.
Uses the middle expansion slot at the rear panel.
Designated as a shared slot with PCI slot J2.
J2
PCI Supports full-length 32-bit PCI local bus expansion boards.
Uses the middle expansion slot at the rear panel.
Designated as a shared slot with ISA slot J3.
J1 PCI Supports half-length 32-bit PCI local bus expansion boards.
Uses the bottom expansion slot at the rear panel.
NOTE Only one expansion board can reside in slot J3 and J2 at any one time. These slots
have to share the middle expansion slot opening at the rear panel