Installing an Expander Cabinet
3-15
1.
Use an adjustable wrench to lower and adjust the leveler feet. A ship-
ping bracket can also be used to adjust the leveler feet, since the
bracket cutout and leveler feet hexnuts are the same size.
2.
Use a bubble level while adjusting the feet and make sure all cabinets
are properly leveled in three dimensions (top to bottom, side to side,
and front to rear). The operation is complete when all intercabinet
bolt holes are aligned. Bolt holes are located at the tops of the cabi-
nets and at the bottom door hinges of the cabinets.