Installation Overview
1-3
In general, the procedure is as follows (Figure 1-1):
1.
Install the system cabinet as described in Chapter 2.
2.
If the system has one or more expander cabinets, refer to Chapter 3 for
installation instructions.
3.
Connect the console, and, if appropriate, make the Ethernet and FDDI
connections as described in Chapter 4.
4.
If connecting to a DSSI subsystem (VAX 7000 systems only), refer to
Chapter 5 for installation instructions and to Appendix A and Appen-
dix B for background information.
5.
If connecting to a CI VMScluster, refer to Chapter 6 for installation in-
structions.
6.
Power up the system as described in Chapter 7.
7.
Observe and consider the results of the system self-test as described in
Chapter 8.
8.
Verify system operation by running various diagnostics and utilities as
described in Chapter 9.