Installing an Expander Cabinet
3-11
1.
Using a 10 mm hex socket wrench, remove the two bolts on the inside
top of the frame that attach the end panel to the cabinet.
2.
Disengage the end panel from the mounting brackets on the frame by
sliding the end panel upward. Then remove the end panel (see Figure
3-5).
3.
Remove the three mounting brackets which previously secured the end
panel to the cabinet. The brackets are located at the top, middle, and
bottom of the cabinet frame. Each bracket is held to the frame with
two screws. Use a Phillips screwdriver to remove all screws.
4.
Put the brackets, screws, and end panel aside until they are needed
for installation onto the expander cabinet.
5.
Repeat 1 through 4 for the other side of the system cabinet if a second
expander cabinet is to be installed.