Digital Electronics PS-3650A Series, Руководство пользователя

Страница: 9 / 20

9
• Be sure to check that the PS-A unit’s power is disconnected before installing the unit,
in order to prevent an electrical shock.
• Do not attempt to modify or open the HDD unit, since it can cause a shock or fire.
• When installing the HDD unit, be sure to read the following “2. Installation” section’s
information completely to insure that the unit is correctly installed.
To Prevent Accidents
• Since the HDD unit is a precision instrument, be sure it is neither hit by nor pressed
strongly against another object. After unpacking, be sure the unit is not dropped or
jolted during installation. Also, a PS-A unit built in to a larger unit (i.e. operation
panel) should be removed and packed separately prior to shipping.
• Be sure water, liquids or metal particles are not allowed to enter the HDD unit. Any of
these may cause either a breakdown or an electrical shock.
• Do not place or store this unit in a location where there is direct sunlight, excessive
heat, dust or vibration.
• Do not store or operate this unit near chemicals, or where there are chemical fumes.
• Do not allow anyone other than Pro-face’s own service staff to perform maintenance or
adjustments to this unit.
• Do not move or shift the PS-A unit while the HDD unit is installed and the PS-A unit's
power is ON.
• Do not use the HDD unit in locations where corrosive gasses are present, since they
can lead to a hard disk breakdown.
• To prevent the data damage, be sure to shut down the PS-A unit's OS according to the
correct procedure before turning OFF the main power.
• To prevent HDD memory leaks, restart the OS periodically.
• The hard disk has the lifetime. To use it longer by steady operation, read the attached
"Instructions for Using the Hard Disk" carefully.
• In order to extend the lifetime of the hard disk, Pro-face recommends you set the
Windows
®
[Control panel]-[Performance and Maintenance]-[Power Management
option]-[Turn off hard disks] selection to turn the hard disk off when the unit is not
being operated. A setting of 5 minutes is recommended.
Unit Disposal
• When this HDD unit is disposed of, it should be done so according to your country’s
regulations for similar types of industrial wastes.
Safety Cautions