E-11
Confirm the Installation Gasket's Positioning
It is strongly recommended that you use the gasket. It absorbs vibration in addition
to repelling water.
Place the ST on a level surface with the display panel facing downward. Check that
the ST’s installation gasket is seated securely into the gasket’s groove, which runs
around the perimeter of the panel’s frame.
• Before installing the ST into a cabinet or panel, check that the instal-
lation gasket is securely attached to the unit.
• A gasket which has been used for a long period of time may have
scratches or dirt on it, and could have lost much of its dust and drip
resistance. Be sure to change the gasket periodically (or when
scratches or dirt become visible).
• Be sure the gasket's seam is not inserted into any of the unit's cor-
ners, only in the straight sections of the groove. Inserting it into a
corner may lead to its eventually tearing.
• To ensure the installation gasket's maximum level of moisture resis-
tance, be sure the gasket's seam is inserted as shown into the
panel's bottom face.
4
Installation
Create a Panel Cut and insert the ST into the panel from the front
92.5 [3.64 ]
+1
0
118.5 [4.67 ]
+1
0
Under 4-R3 [0.12]
Unit:mm[in.]
+0.04
0
+0.04
0
F1
F1
F2
F2
F3
F3
F4
F4
F5
F5
F6
F6
1.6mm[0.06in.]
to 5.0mm[0.2in.]
Gasket
Rear face of ST
