Digital Electronics Corporation FP-570-TC-11, Руководство пользователя

Страница: 35 / 57

Touch Panel Commands
4-3 FP-570T User's Manual
4-3 Touch Interface Data
Since the FP uses an analog type touch panel, all 640 x 480 coordinates can be
detected. Resolution of the analog touch panel is 1024 x 1024, so a conversion
program to convert the coordinates to 640 x 480 becomes necessary.
Also, a calibration program to adjust the actual touch position is needed.
As a result, the following software is included with the FP-570T unit.
ATPH.EXE ....Passes 640 x 480 touch coordinate data to user program.
(This is not a mouse simulation program)
CALIB.EXE .Calibrates the touch coordinate data to the actual touch
position. This program is to be used with ATPH as a set.
Touch Panel Coordinate Data
(1) Resolution
Both the X and Y coordinates have a resolution of 1024.
The origin point (0,0) is located in the upper right corner of the screen.
(0,0)
(1023,1023)
OS and Touch Panel Driver Combinations
*1 The following software is sold separately.
TT-WIN: A mouse simulation driver for Windows 3.1 -- sold by GUNZE LIMITED.
TT-WINNT: A mouse simulation driver for Windows NT -- sold by GUNZE LIMITED.
TT-WIN95: A mouse simulation driver for Windows 95 -- sold by GUNZE LIMITED.
Screen display origin, with
resolution of 640 x 480, is normally
at the upper left corner of the screen.
Therefore, a software to convert the
touch coordinates to display coordi-
nates is needed.
OS Touch I/F Program
Calibration
Windows® 3.1
TT-WIN *1
Feat ure i ncl uded i n
t he t ouch I /F program
Windows® NT
TT-W I NNT *1
Feat ure i ncl uded i n
t he t ouch I /F program
W indow s® 95 TT-W I N95 *1
Feat ure i ncl uded i n
t he t ouch I /F program
D O S ATPH CALI B.EXE
O thers userprogram m ed userprogram m ed