background image

FP-570T User's Manual

3-2

Installation and Wiring

• For easier maintenance and operation, and improved ventilation, be
sure the FP unit is mounted at least 100 mm away from any adjacent
structures or objects.

• The FP uses natural ventilation through its outer shell for cooling.
When installing the unit horizontally or sideways (portrait style), use a
fan or air conditioning unit to prevent overheating.
Vertical Installation

Front

Side

Horizontal Installation

When installing the FP sideways, place it so that the Power Terminals point
upwards.

Check that heat from surrounding equipment will not cause the FP to overheat.

Do not use the 100V FP-570-TC11 in an environment that exceeds 40

C,

and the 24V FP-570-TC21-24V in an environment that exceeds 45

C.

Ensure this unit is located as far away as possible from electromagnetic
circuits, non-fuse type breakers, and other equipment that can cause arcing.

When installing the FP unit in a panel with an angled face, the face should
not incline either backwards or forwards more than 30

o

.

less than 30

o

Sideways Installation

Содержание FP-570-TC-11


























































Отзывы: