Digital Electronics Corporation APL3600-TA, Руководство по установке

Страница: 10 / 18

10
External Interfaces
• This PL unit’s serial port is not isolated.
When the host (PLC) unit is also not
isolated, and to reduce the risk of dam-
aging the RS-232C/RS-422/RS-485
circuit, be sure to connect pin #5 SG
(Signal Ground) terminal.
• Never connect NC to COM1.
• Connect FG to shell.
„
Serial Interface
(COM1, COM2, COM3, COM4)
‹
COM1, COM2, COM3, COM4
‹
COM1
*3 To change the communication method, set
the dip switch located on the circuit board in
the PL unit to the desired position.
For details, see [Internal Switches].
Interfit Bracket #4-40 UNC
Pin #
RS-232C
Signal Name Meaning
1 CD Carrier Detect
2 RD(RXD) Receive Data
3 SD(TXD) Send Data
4 ER(DTR) Data Terminal Ready
5 SG Signal Ground
6 DR(DSR) Data Set Ready
7 RS(RTS) Request to Send
8 CS(CTS) Clear to Send
9 CI(RI)/+5V
Called status display/
+5V Output 0.5A
*1 *2
*1 Only COM1 and COM2 are available for
switching to +5 V. COM3 and COM4 are used
exclusively for CI (RI).
*2 Slide switch on the circuit board in the PL unit
switches between CI (RI) and +5 V. For
details, see [Internal Switches].
Shell FG
Frame Ground
(Common with SG)
Pin #
RS-422
*3
Signal Name Meaning
1 RDA Receive Data A(+)
2 RDB Receive Data B(-)
3 SDA Send Data A(+)
4 ERA
Data Terminal Ready
A(+)
5 SG Signal Ground
6 CSB Clear to Send B(-)
7 SDB Send Data B(-)
8 CSA Clear to Send A(+)
9 ERB
Data Terminal Ready
B(-)
Shell FG
Frame Ground
(Common with SG)
Pin #
RS-485
*3
Signal Name Meaning
1 DATA +
Send/Receive Data
(+)
2 DATA -
Send/Receive Data
(-)
3 NC No Connection
4 NC No Connection
5 SG Signal Ground
6 NC No Connection
7 NC No Connection
8 NC No Connection
9 NC No Connection
Shell FG
Frame Ground
(Common with SG)