DSE Model 5220 Automatic Mains Failure & Instrumentation System Operators Manual
50
057-012 5220 OPERATING MANUAL ISSUE 5.1 18/06/2007 AM
15.5 5200 SERIES CONFIGURATION SOFTWARE AND P810 INTERFACE MODULE
The
5210
module can be configured using PC with Interface Module
810
and
52xx series PC configuration
software.
The 5200 series configuration software kit comprises the following:-
•
810
Interface Module
•
25 to 9 way adapter
•
RJ45 (8 Pin) Connecting Lead
•
DSE SoftwareCD with configuration software
15.6 OUTPUT EXPANSION
There are several methods of output expansion available for the 5210 module:-
15.6.1 RELAY OUTPUT EXPANSION (157)
An expansion module is available, which connects to the configuration socket, and
enables the 5210 to use eight additional relays, providing Volt-free contacts for
customer connection.
Refer to technical data sheet on the 157 relay module for further details.
15.6.2 LED OUTPUT EXPANSION (548)
An expansion module is available, which connects to the configuration socket, and
enables the 5210 to use eight additional LED’s, providing remote LED indication up
to 50 metres away.
Refer to technical data sheet on the 548 LED module for further details.
It is possible to use a mix of 157 and 548 modules to give both relay and LED
expansion of the same 8 items if required (Please refer to our Technical Support
department for details.).
15.7 INPUT EXPANSION
It is possible to increase the number of monitored inputs available by utilising a
DSE 540/541 Protection Expansion/Annunciator. Please refer to our Technical
department for details.
15.8 STANDBY GENERATING SET?
The 5210 needs to be given a remote start signal to initiate an engine start. This can
be supplied by a Mains/Utility monitoring module to make the generating set start up
automatically should the mains/utility supply fail. The 5210 module may be used in
conjunction with DSE Automatic transfer switch controllers such as the model 500
(pictured) , 705 or 530. These not only monitor the mains and issue a start
command to the 5210; they also provide control of the contactors or other
changeover devices. Please refer to our Technical Support department for details.
CALL US TODAY
1-888-POWER-58
REQUEST A QUOTE
SHOP ONLINE
www.genpowerusa.com
