Digital Check SmartSource Expert Micro Elite, Инструкция по установке и эксплуатации, Страница: 20 / 30

Installation & Operations Guide - SmartSource Expert Micro Elite
June 2019
8227 6059-001 Page 20 of 30
by application delays or other non-physical errors. Follow the instructions on the application screen to decide how to
handle the stopped document.
Clearing stopped documents in the track
using the ‘SmartClear’ function
To remove a stopped document from the
track, first use the ‘SmartClear’ function (see
Using the power/start-stop button ,
above). This will cause the unit to drive the stopped document out of the track.
Manually removing stopped documents
If the stopped document is not ejected, then open the front and image covers (see
Basic layout of your SmartSource
Expert Micro Elite above) and remove the stopped document by pulling it parallel to the track, as shown below. Avoid
pulling the document straight up and out of the track.
Pull out stopped document from the front-
parallel to the track
Pull out stopped document-open Image
cover & pull out parallel to the track