Digital-Ally DTM-600, Руководство пользователя

Страница: 62 / 98

860-00324-00 Rev B 62
Figure7-32 Scene Configuration Interface
(2) Scene Name: name of the current scene. Several scene modes have been preset in the device. After a scene
mode is selected, image parameters are automatically switched (you can adjust image parameters as
required).
⚫
Common: recommended for outdoor scenes.
⚫
Standard: standard image parameter, which is the default image style.
⚫
Bright: The image brightness is improved based on the standard mode.
⚫
Vivid: The image saturation is improved based on the standard mode.
⚫
Road Highlight Compensation(HLC): The road highlight can be suppressed so that clear images can be
obtained. It is applicable to road scenes.
⚫
Park Highlight Compensation(HLC): The park highlight can be suppressed so that clear images can be
obtained. It is applicable to park scenes.
⚫
WDR: recommeded for scenes with high-contrast lighting, such as window, corridor, front door or other
scenes that are bright outside but dim inside.
⚫
Custom: set a scene name as needed.
(3)
Select a scene and then click to set it as the default scene.
(4) If auto-switching is enabled, the device can switch to the scene automatically when the condition for
switching to a non-default scene is met. Otherwise, the device remains in the default scene. When auto-
switching is not enabled, The device remains in the current scene.
NOTE!
⚫
If Auto Switching is enabled (scene settings will be unavailable), the device will switch between the set scenes. If
not, the device will stay at the current scene. The device will stay at default scenes unless the non-default scenes
are triggered.
⚫
If multiple non-default scenes are triggered, then the device will switch to the scene with the minimum number
(starting from 1 to 5).
(2) Image Enhancement
NOTE!
All parameters on the Image Enhancement interface use default values and cannot be configured.
(1) Click Setup > Image > Image and then click Image Enhancement .