Digital Alert Systems MultiPlayer DASMP Скачать руководство пользователя страница 5

Страница: 5 / 13

Digital Alert Systems

MultiPlayer Quick Start Guide

Revision 4.0

Page 5 of 13

The next screenshot is the Audio Port Configuration page of the MultiPlayer. In this configuration, all of the channels are AES

digital channels. Port 1 is channel 1, port 2 is channel 2, port 3 is channel 3, and port 4 is channel 4. Each port is individual and

is not bonded to another port. In the DASDEC MultiStation interface, channel 1 would be seen as station 1, channel 2 would be

seen as station 2, channel 3 would be seen as station 3 and channel 4 would be seen as station 4. Therefore, 4 stations can be

configured in the MultiStation interface of the DASDEC.

The screenshot to the right shows the different channel

types that can be selected for port 1 using the dropdown

menu under each port name. While Port 1 was already

configured to be AES from earlier it can easily be changed

to Analog, or Originator.

With AES3 selected for the Port configuration, an input

source is required on the desired Port.

To use AES audio without an input source, “ORIG” must

be selected from the drop down menu, shown on the right.

Содержание MultiPlayer DASMP













