DG-VG2300N User
Manual
56
choose RIP1, RIP2 or Both.
Choose RIP1 indicates the router receives RIP v1 messages.
Choose RIP2 indicates the router receives RIP v2 messages.
Choose Both indicates the router receives RIP v1 and RIP v2
messages.
Send Version
The working mode for sending RIP messages. You can choose RIP1
or RIP2.
Choose RIP1 indicates the router broadcasts RIP1 messages only.
Choose RIP2 indicates the router multicasts RIP2 messages only.
Add
Click it to add the RIP interface to the RIP Config List.
Delete
Select a row in the RIP Config List and click it to delete the row.
NAT
Choose
Advanced > NAT
, and the page shown in the following figure appears. The page that is displayed
contains DMZ, Virtual Server, ALG, NAT Exclude IP, Port Trigger, FTP ALG Port and NAT IP Mapping.
DMZ
Demilitarized Zone (DMZ) is used to provide Internet services without sacrificing unauthorized access to its
local private network. Typically, the DMZ host contains devices accessible to Internet traffic, such as web
(HTTP) servers, FTP servers, SMTP (e-mail) servers and DNS servers.
Click
DMZ
in the left pane, the page shown in the following figure appears.
The following steps describe how to configure manual DMZ.
Step 1
Select Enable DMZ to enable this function.
Enter an IP address of the DMZ host.
Click Apply Changes to save the settings.
