DG-VG2300N User
Manual
33
The following table describes the parameters of this page:
Field
Description
IP Address
Enter the IP address of LAN interface. It is recommended to use an
address from a block that is reserved for private use. This address block
for example is 192.168.1.1 - 192.168.1.254.
Subnet Mask
Enter the subnet mask of LAN interface. The range of subnet mask is
from 255.255.0.0 - 255.255.255.254.
Secondary IP
Select it to enable the secondary LAN IP address. The two LAN IP
addresses must be in different networks.
IGMP Snooping
When IGMP snooping is enabled, only hosts that belong to the group
receive the multicast packets. If a host is deleted from the group, the host
cannot receive the multicast packets any more.
MAC Address Control
It is the access control based on MAC address. Select it, and the host
whose MAC address is listed in the Current Allowed MAC Address table
can access the router.
Add
Enter MAC address and then click it to add a new MAC address.
Current allowed MAC
address table
All the allowed MAC addresses added will be listed here.
