DG-LB1054UV User Manual
87
3.2.5.2 SNMP
In brief, SNMP, the Simple Network Management Protocol, is a protocol designed to give a
user the capability to remotely manage a computer network by polling and setting terminal
values and monitoring network events.
1.
SNMP Enable
: You can check “Local(LAN)”, “Remote(WAN)” or both to enable SNMP
function. If “Local(LAN)” is checked, this device will respond to the request from LAN.
If “Remote(WAN)” is checked, this device will respond to the request from WAN.
2.
Supported Versions:
Supports SNMP V1, V2c and V3.
3.
Get Community:
The community of GetRequest that this device will respond. This is a
text password mechanism that is used to weakly authenticate queries to agents of
managed network devices.
4.
Set Community:
The community of SetRequest that this device will accept.
5.
Trap Event Receiver 1 ~ 4:
Enter the IP addresses or Domain Name of your SNMP
Management PCs. You have to specify the IP address, so that the device can send SNMP
Trap message to the management PCs consequently.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the changes.
6.
WAN Access IP Address:
If you want to limit the remote SNMP access to specific
computer, please enter the PC`s IP address. The default value is 0.0.0.0, and it means that
any internet connected computer can get some information of the device with SNMP
protocol.
