DG-LB1054UV User Manual
51
3.1.5 Routing Setup
If you have more than one routers and subnets, you will need to enable routing function to allow
packets to find proper routing path and allow different subnets to communicate with each other.
3.1.5.1 Static Routing
For static routing, you can specify up to 32 routing rules. The routing rules allow you to
determine which physical interface addresses are utilized for outgoing IP datagrams. You can
enter the
destination IP address
,
subnet mask
,
gateway
and
hop
for each routing rule, and
then enable or disable the rule by checking or un-checking the Enable checkbox.
1.
Destination
: Enter the subnet network of routed destination.
2.
Subnet Mask
: Input your Subnet mask. Subnet mask defines the range of IP address in
destination network.
3.
Gateway IP:
The IP address of gateway that you want to route for this destination
subnet network. The assigned gateway needs in the same subnet of LAN side or WAN
