DG-BR4313NG User Manual
99
Port Range
Input the starting port number in the upper field, and
input the ending port number in the bottom field. If you
only want to redirect a single port number, just fill the
port number in the upper field.
Comment
Please input any text to describe this mapping, up to 16
alphanumerical characters.
Add
Add the mapping to port forwarding table.
Reset
Remove all inputted values.
Current Port Forwarding
Table
All existing port forwarding mappings will be displayed
here.
Delete
Please select a port forwarding mapping by clicking the
‘Select’ box of the mapping, then click ‘Delete’ button
to remove the mapping. If there’s no existing mapping,
this button will be grayed out.
Delete All
Deletes all mappings existing in the current port
forwarding table.
Reset
Unselect all mappings.
After you finish with all settings, please click ‘Apply’ button and the following message will
be displayed on your web browser:
If you want to reset all settings in this page back to previously-saved value, please
click ‘Cancel’ button.
Please click ‘Continue’ to go back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait
for about 55 seconds while router is rebooting).
