DG-BR4313NG User Manual
79
DTIM Period
Set the DTIM period of wireless radio. Do not modify
default value if you don’t know what it is, default value is 3.
Data Rate
Set the wireless data transfer rate to a certain value. Since
most of wireless devices will negotiate with each other and
pick a proper data transfer rate automatically, it’s not
necessary to change this value unless you know what will
happen after modification.
Channel Width
Set channel width of wireless radio. Do not modify default
value if you don’t know what it is, default setting is ‘Auto
20/40 MHz’.
Preamble Type
Set the type of preamble, do not modify default value if you
don’t know what it is, default setting is ‘Short Preamble’.
Broadcast ESSID
Decide if the wireless router will broadcast its own ESSID or
not. You can hide the ESSID of your wireless router (set the
option to ‘Disable’), so only people those who know the
ESSID of your wireless router can get connected.
CTS Protect
Enabling this setting will reduce the chance of radio signal
collisions between 802.11b and 802.11g/n wireless access
points. It’s recommended to set this option to ‘Auto’ or
‘Always’. However, if you set to ‘None’, your wireless
router should be able to work fine, too.
WMM
It is short for Wi-Fi Multimedia, it will enhance the data
transfer performance of multimedia contents when they’re
being transferred over wireless network. If you don’t know
what it is / not sure if you need it, it’s safe to set this option
to ‘Enable’. Default is “Enable”.
After you finish these wireless settings, please click ‘Apply’ button and the following
message will be displayed on your web browser:
Please click ‘Continue’ to go back to previous setup menu; to continue on router setup, or
click ‘Apply’ to reboot the router so the settings will take effect (Please wait for about 55
seconds while router is rebooting).
