background image

 

2

INTRODUCTION

  

 

ACOUSTIC EAVESDROPPING 
 
Thank you very much for purchasing the DNG-2300 digital noise generator. The DNG-2300 is 
designed to prevent listening though devices that cannot be detected by conventional 
countermeasures and installed around the perimeter of a room – wired wall microphones, contact 
microphones, AC outlet transmitters and window systems based on the reflection of 
laser/infrared/microwave beams. It is an excellent addition to high level countermeasures. 
 
It is well-known that sound distributes though walls, doors, windows and other constructions. In 
some materials sound travels even better than through air. For example, water is a good conductor 
and a heating system can pass a conversation out of a room. Eavesdroppers take advantage of this 
with the use of contact microphones. These microphones pick up the vibrations from the air ducts, 
plumbing, structures, walls, windows, doors, floors, ceilings and more. The microphones may not 
be in the same room as the conversation, but may be several floors or rooms away attached to a 
pipe or other fixture.  
 
The DNG-2300 can render these devices useless. It produces non-filterable acoustic noise which is 
transferred to constructions by transducers and speakers. REI’s TRN-2000 is the recommended 
transducer for use with the DNG-2300. It has optimal power parameters and can be set on different 
types of surfaces. The TRN-2000 injects most of its power into surfaces while only a tiny part of 
the noise gets inside a room. This does not force people to speak louder. The TRN-2000 transducer 
can be supplied with adapters for mounting on walls, ceilings, windows, etc. 
The speaker OMS-2000 can also be used with the DNG-2300. It does not inject the noise into the 
surfaces but radiates it into surrounding space. The OMS-2000 is usually used in air ducts, ceiling 
tiles, etc.  
 
TRULY RANDOM NOISE 
 
The DNG-2300 consists of 3 independent white noise digital generators. “White” means that the 
noise is fully random and is equally distributed along the voice spectrum. This distribution 
provides complete resistance against the filtering of a conversation. Another feature of white noise 
is its unpredictability i.e. there is no method to wipe it out from a recorded conversation.  
 
VOICE MASKING 
 
Men’s and women’s voices consist of lots of frequencies simultaneously produced during speech. 
These frequencies lie between 100 Hz and 6000 Hz. Listening devices usually have a narrower 
range mostly because of size limitations, the scheme of the device and battery time. The DNG-
2300 has a range of 250-5000 Hz which is optimal to cover all types of voices and suppress all 
listening devices.  
 
OPERATION 
 
The DNG-2300 uses a combination of transducers and speakers placed strategically throughout a 
target area to create a blanket of masking noise that covers private conversations from 
eavesdropping. Each transducer utilizes adapters for mounting to a variety of surfaces such as 
walls, windows, ductworks, plumbing, etc. The three separate channels allow the user to tailor the 
noise for separate materials, allowing greater flexibility and increased protection.  
 
 

Содержание DNG-2300












Отзывы: