DIGIQUEST
22
The word Codified (Scrambled) appears
The channel viewed is part of a paid package.
The image appears crushed or cut
The picture format in the
AV setting > Aspect mode
menu has
not been set according to the TV's characteristics. Try another
format.
No sound heard
Check the HDMI or SCART connection cable.
Check whether the Mute function is activated. Use the decoder
or TV remote control to turn it off.
Make sure the volume of your decoder or TV is high enough.
Press the volume buttons on the decoder or TV remote control
to adjust.
Check that the decoder is properly connected to your TV or
audio system.
Some connections to the decoder may have been "loose".
Channel loss or decoder block. Deleting channel or FAV
lists
Exclude all automatic updates and resume automatic channel
tuning.
The inserted USB memory is not recognized
Not all USB devices are compatible. It is recommended to use
powered HDDs that are equipped with their own power supply.
Compatibility with large capacity USB devices is not
guaranteed; if problems arise, we recommend that you run a
partition or use a smaller capacity HDD.
NOTE:
the manufacturer is not responsible for any damage or loss
of data.
Some files are not recognized
The manufacturer cannot guarantee the playback of the files
even though the extension is supported: this depends on the
Codec used, the data bit rate and the resolution. Any codec
update is the responsibility of the main board manufacturer, it is
not possible to do it via SW.
The decoder turns off
As required by recent European energy saving regulations, this
decoder automatically switches off after 3 hours if no operation
is performed.
