Digimerge DPZ16TO27 страница 7 Скачать руководство пользователя

Страница: 7 / 49

Speed Dome Camera Instruction Manual

7/49

MAX. 8 sets of Swing are programmable. This function is that the camera moves

repetitively between two preset positions at programmed speeds.

MAX. 4 Patterns are programmable. This function is that the camera memorizes the

path (mostly curve path) by the joystick of the controller and revives the trajectory

operated by the joystick as closely as possible.

MAX. 8 sets of Group are programmable. This function is that the camera memorizes

the combination of Presets, Pattern and/or Swings sequently and runs Presets, Pattern

and/or Swings repetitively. A Group can be combined upto 20 functions with any of

Preset/Pattern/Swing.

MAX. 8 Privacy Masks are programmable, not to intrude on any other’s privacy.

PTZ(Pan/Tilt/Zoom) Control

With the RS-485 communication connection, MAX. 255 units of cameras can be

connected to a single controller.

Pelco-D or Pelco-P protocols can be selected as a control protocol in the current

firmware version.

OSD(On Screen Display) Menu

OSD menu is provided to display the status of camera and to configure the functions

interactively.

The information such as Camera ID, Pan/Tilt Angle, Direction, Alarm Input and Preset

is displayed on screen.

Alarm In/Out Function(Only for the models which have I/O function)

3 alarm sensor inputs and 1 alarm sensor outputs are available.

The camera can be set to move to a Preset position or to run functions such as Pattern,

Swing and Group when there are external sensor activations. Also “Post Alarm”

function is possible, which is supposed to activate after user-defined time period and

sequentially in succession to the action by external sensor activations.

Reserved Presets(Hot Keys)

Most camera setup options can be set up easily and directly with the reserved presets

(Hot Keys), without entering into OSD menu. For more information, refer to “Reserved

Presets(Hot Keys)” in this manual.

Perfect Outdoor Environment Compatibility and Easy Installation

The fans and heaters are built-in in the camera for cold and hot temperature

environment. Also idealistic mechanical design protects the camera from water and

dust. (IP66 when installed properly with wall mount bracket only)

INTRODUCTION

Содержание DPZ16TO27

















































Результаты поиска

Содержание DPZ16TO27

Отзывы:

Похожие инструкции для DPZ16TO27

Бренды по названию

Популярные бренды

Digimerge DPZ16TO27, Инструкция по эксплуатации

Результаты поиска

Содержание DPZ16TO27

Отзывы:

Похожие инструкции для DPZ16TO27

Бренды по названию

Популярные бренды