Speed Dome Camera Instruction Manual
24/49
OSD Display
P/T/Z Information
Camera ID
Alarm Information
Action Title
Preset Label
LABEL12345 PRESET1
I:-2- O:1
CAM 1 15/4/x1/N
z
P/T/Z Information Displays the amount of pan from zero degree vertical, the amount of
tilt from zero degree horizontal and current compass direction. Also
identifies the amount of the zoom magnification.
z
Camera ID
Displays the selected Camera ID (Address).
Identfies Actions
"SET PRESET xxx"
When Preset xxx is memorized.
"PRESET xxx"
When the camera reaches Preset xxx.
"PATTERN x"
When Pattern x is in action.
"SWG
×
/PRESET xxx" When Swing x is in action. Displays both of Swing
number and Preset number.
z
Action Title
"UNDEFINED"
When a undefined function is called to run
z
Preset Label
Displays preset labels when the camera arrives at presets.
z
Alarm Information Displays activated alarms. This information shows current state of
Alarm Inputs and Relay Outputs. If an Input point is
ON
state, it will
show a number corresponding to each point. If an Input point is
OFF
state,
'-'
will be displayed.
Example) The point 2 & 3 of inputs are
ON
and Output is
ON
,
OSD will
show as below.
I:-23 O:1
OPERATION
3
