background image

Revision 1.0

21

Main Menu Control

SECTION 4

Main Menu Control

• Enter the 

MENU

 screen by pressing the 

MENU

 button. The System Password may be required, 

based on system settings. 

• Scroll through the 5 Main options by pressing the 

KL

 buttons. 

• To enter a sub-menu, navigate to the option and press the 

SEL

 button. 

• To exit a 

SUBMENU

, press the 

MENU

 button. To save the changes, select the 

SAVE & EXIT

option and press the 

SEL

 button. 

• Pressing the 

MENU

 button from the 

MAIN MENU

 will exit the 

MENU

 configuration screen

Outlined below are the buttons used to access menu settings:

NOTE

After 60 seconds of inactivity in the Menu mode, the system will go back to the previously 
displayed live camera screen

KL

IJ

SEL

MENU

: Scroll up and down within a menu option / Change menu options
: Press this button to select and change the values in a menu option
: Complete modifications of a menu option; exit a menu

DISPLAY SET
RECORDING SET
SYSTEM SET
NETWORK SET
EVENT NOTIFICATION

Set the display options
Set the Recording options
Set the System options
Set the Network Options
Setup for Event Notifications 
through Email

MAIN MENU

DISPLAY SET
RECORDING SET
SYSTEM SET
NETWORK SET
EVENT NOTIFICATION

Содержание DHU500































































Отзывы: