5
System
Contents
The DGR100/101 box should include the items listed below. Please take a moment to verifty that no items
are missing from the package.
NOTE:
KEEP THE KEYS IN A SAFE PLACE. THEY ARE NECESSARY FOR INSTALLATION /
REMOVAL OF THE HARD DISK DRIVE.
Getting Started
If the purchased DVR model did not contain a hard disk drive, please refer to Appendix #1 for HDD
installation instructions.
1. Connect video sources and monitor(s) following one of the configuration examples shown in
Appendix # 2.
2. Connect the AC Power Cord to the Power Adapter and plug into an electrical outlet. A Red LED
indicator light will be ON to indicate that the DVR is in Standby mode.
3. Press the Power button. The POWER LED will turn from red to orange, and other red LED
indicators will turn ON. Note: the system takes approximately 5 to 15 seconds to power up. During
the power-up, you will see the following messages: “HDD Detecting”, followed by “Master HDD
Connected”.
Once connected, the POWER LED will change to green, and red indicator lights be ON next to the Alarm
and Timer buttons.
NOTE: IF YOU GET THE MESSAGE “HDD NOT FOUND”, PLEASE SEE APPENDIX #1 AS THE HDD
IS LIKELY NOT INSTALLED CORRECTLY.
Single channel DVR
Installation / User
Manual
2 Keys for
Hard Drive Cartridge
Power Adapter and Cord
Alarm Block
Hard Disk Drive
(not included with all models)
