Touch RFID
Latch Mechanism
Assigned Use Functionality
Product Guide
5
Touch RFID
Latch Mechanism
Assigned Use Functionality
Product Guide
4
R F I D
CARD
Manager
R F I D
CARD
Manager
R F I D
CARD
Programming Instructions
Express Register User and Manager Credentials
The Programming Key can quickly program multiple locks to operate with the same user and manager credentials.
Go to a lock already programmed to operate with the user and
manager credentials.
Touch and hold
`
for 15 seconds (a two-tone beep will be heard
after 5 seconds followed by 2 sets of two-tone beeps after 10
seconds followed by 3 sets of two-tone beeps after 15 seconds)
then release.
The LED will flash.
Insert the Programming Key.
Two sets of two-tone beeps will be heard and the LED will turn off.
Insert the Programming Key to program each lock to operate with
the same user and manager credentials.
Two sets of two-tone beeps will be heard and the LED will flash
once to indicate successful programming.
End express registration.*
Go to any programmed lock
Touch
`
then insert the Programming Key.
Assign User Credentials
Up to 20 user credentials (User Key or RFID) may be assigned to each lock.
Touch and hold
`
for 5
seconds (a two-tone beep will
be heard after 5 seconds) then
release.
The LED will flash and the
Reader will turn on.
Insert a valid Manager Key or
present a valid Manager RFID.
A two-tone beep will be heard.
Insert each User Key or present
each User RFID one at a time.
Two sets of two-tone beeps
will be heard for each user
credential assigned to the lock.
Insert a valid Manager Key or
present a valid Manager RFID.
A two-tone beep will be heard
and the LED and Reader will
turn off.
or
or
*The Programming Key will continue to function in express registration mode until it is used to operate a lock.
1
1
2
2
3
4
3
4a
4b
R FID
CARD
R FID
CARD
Manager
R FID
CARD
Manager
R FID
CARD
Manager
Operating Instructions - In Assigned Use Functionality
Programming Instructions
In assigned use functionality, users operate the lock with their assigned user credential (User Key or RFID).
Operate with a User RFID
To unlock: Touch
`
then
present an assigned
User RFID.
To relock: Close the door.
Operate with a User Key
To unlock: Insert an assigned
User Key.
To relock: Close the door.
Operate with a Manager
Credential
To unlock: Insert a valid
Manager Key or
touch
`
then
present a valid
Manager RFID.
To relock: Close the door.
Operate with the
Programming Key
To unlock: Touch
`
then insert
the Programming
Key.
To relock: Close the door.
Remove User Credentials
The locks must be reprogrammed to remove user credentials from operating a lock.
Collect all remaining and replacement user credentials.
Touch and hold
`
for 5 seconds (a two-tone beep will be heard
after 5 seconds) then release.
The LED will flash and the Reader will turn on.
Insert a valid Manager Key or present a valid Manager RFID.
A two-tone beep will be heard.
Insert a valid Manager Key or present a valid Manager RFID again.
Three sets of two-tone beeps will be heard and the LED and Reader
will turn off.
All previously assigned user credentials will be removed.
Follow Assign User Credentials instructions to assign the remaining
and replacement user credentials.
or
or
or
1
3
4
2a
2b
