Digilock NEXTLOCK CUE Series, Руководство пользователя

Страница: 36 / 42

8
Installation
Position the strike plate on the door frame centering
it with the center of the desired location of the door
mounting holes.
Drill 0.25” (6.35 mm) pilot holes using a 1/6" drill bit.
Adjust the strike plate to the proper position (.32"
(8 mm) from the door edge) then tighten the self
tapping screws.
Allow .32" (8 mm) from door edge and mark the
position of the adjustment slot holes.
Position the strike plate and the self tapping screws into
the adjustment slot holes. Do not tighten the screws.
Position and tighten the remaining self tapping screw
into the center hole.
Door Frame
1
Door Frame
Drill Pilot
Holes Here
3
Door Frame
0.32 in
(8 mm)
Mark Here
2
Door Frame
0.32 in
(8 mm)
5
Door Frame
4
Door Frame
6