Digilock NEXTLOCK CUE Series, Руководство пользователя

Страница: 10 / 42

Key Managed
Latch Mechanism
Product Guide
Register/Add Manager Key(s)
Manager Key(s) can be registered to a lock after Initial Setup has been completed.
a.
Go to the lock requiring Manager Key(s).
b.
Press
=`55`
. The LED will turn on.
c.
Touch the Programming Key to the key slot until a two-tone beep is heard.
d.
Touch each Manager Key to the key slot. A two-tone beep will be heard for each Manager Key that is successfully registered.
e.
Touch the Programming Key to the key slot until a two-tone beep is heard and the LED turns off.
f.
Repeat above steps for each lock or follow Express Register Manager Key(s) instructions to register the same Manager Key(s)
to multiple locks.
For Lost or Stolen Keys
For a lost or stolen Programming Key:
A replacement Programming Key must be purchased and registered to the lock(s) to prevent the lost/stolen Programming Key from accessing/
programming a lock.
For lost or stolen Manager Key(s):
All registered Manager Keys must be erased and only the remaining Manager Keys must be registered to the lock(s) to prevent the lost/stolen
Manager Key from accessing a lock. Purchase additional Manager Key(s) from an authorized distributor.
a.
Collect all remaining Manager Key(s).
b.
Press
=`55`
. The LED will turn on.
c.
Touch the Programming Key to the key slot until a two-tone beep is heard.
d.
Touch the Programming Key to the key slot again until three sets of two-tone beeps are heard and the LED turns off.
All previously registered Manager Key(s) are erased from the lock.
e.
Follow Register/Add Manager Key(s) instructions to register the remaining Manager Key(s).
Assign User Credential
Once a user credential is assigned, the previously assigned user credential will no longer operate the lock.
Assign a User Code (default user code =
1234
):
a.
Press
=`
then touch a registered Manager Key to the key slot until the LED turns on.
b.
Press
=
[new 4-digit code]
`
. A two-tone beep will be heard.
c.
To confirm, press
=
[the same 4-digit code]
`
. Two sets of two-tone beeps will be heard and the LED will turn off.
Assign a User Key:
a.
Press
=`
then touch a registered Manager Key to the key slot until the LED turns on.
b.
Touch a User Key to the key slot until a two-tone beep is heard and the LED turns off.
Programming Instructions